Datasheet

Technical Details:
Kit Contents:
• Chip: MGC3130 3D Tracking and Gesture Controller
• Detection range: 0 to 15 cm in ideal circumstances
• Temperature Range: -20 to +85
• Position Rate: 200 positions/sec
• Spatial Resolution: up to 150 dpi
• Proximity and Touch Sensing
• Flick Large has a red/green dual colour LED that can be driven using pins LED1 and LED2
• Flick Large has level shifting on board so can work with any microcontroller with either 5V or
3V3 power and data signals
• Compatible with the Hillstar Development Kit over USB on PC in order to use with a computer or
to program new firmware onto the board.
• Available gestures: Swipe (east to west, west to east, north to south, south to north), tap and
double tap (center, east, west, north, south), airwheel (clockwise, anti-clockwise) and touch
(center, east, west, north, south)
• Works even through the Flick Large case
• No detection blind spots
• Low-power design
• 1 Flick Large
• 1 Jumper cable F-M
• 1 Jumper cable F-F
• 3 Stickers
• 2 Info cards