Manualshelf

Instructions / Assembly

ManualsBrandsPia Ricco ManualsLighting9 in. 1-Light Matte Black Mini Pendant Hanging Light, Kitchen Pendant Lighting With Clear Glass
12
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 6
STEP 4
Install bulb (not included)
STEP 7
1. Unscrew the decorative nut A, install the glass shade as shown.
2. Attach the glass shade onto fixture using decorative nut A.
1 2 3 4 5
White wire from
the fixture
Ground wire from
the Fixture
Black wire from
the fixture
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)
Secure the ceiling plate to the
mounting unit with the ball nuts.
STEP 5
INSTALLATION (CEILING LIGHT)
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure with electrical tape.
STEP 6
STEP 4
Install bulb (not included)
STEP 7
1. Unscrew the decorative nut A, install the glass shade as shown.
2. Attach the glass shade onto fixture using decorative nut A.
1 2 3 4 5
White wire from
the fixture
Ground wire from
the Fixture
Black wire from
the fixture
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)
Secure the ceiling plate to the
mounting unit with the ball nuts.
STEP 5
STEP 1
1.Unscrew the ball nuts from
the mounting unit.
2.Use the mounting screws
to attach the mounting unit
to the junction box.
STEP 2
Install stem E on of the ceiling
plate and secure with washer A,
washer B and decorative nut B.
STEP 3
Thread the fixture wire and fixture
ground wire through the stem E
and the ceiling plate, then
screw them into the fixture.