Users Manual

PIAVET BASE STATION

Overview

The Piavet Base Station enables wireless transmission of high-volumes

of medical data. On the one hand, it receives data from the Piavet

Measuring Device (via Bluetooth). On the other hand, it transmits data

to the server (via internet).

• The Piavet Base Station must be connected to a power source

and the internet in order to start and stop a measurement and to

transmit vital data in real-time.

• In addition, the Piavet Measuring Device and Base Station must not

have a distance above 30 meters. Please ensure that there are no

major limiting factors such as metal doors or walls separating the

Measuring Device from the Base Station.

• If the above requirements are fulfilled, the status of the Piavet

Measuring Device is shown on the Piavet Platform as “ready”.

This means that the Measuring Device is ready to start and stop a

measurement and vital data will be transmitted in real time.

Note: You might check the status of the Piavet

Measuring Device on the Piavet Platform, by

clicking on “Devices”. When connection is

interrupted, limit the distance between the

Measuring Device and the Base Station up to 10

meters. In such a case, vital data will be stored