Operating Instructions and Installation Instructions

DT2011867-01
6.8 PROGRAMMING
The remote control can be used to select the following functions from the main MENU:
These functions are activated by opening the front ap and pressing the following keys:
- the MENU key is used to access the main menu and return to the initial display at any time during programming to alter data that has been input
incorrectly;
- the MENU SELECT key is used to scroll through the main menu and the submenus;
- the SET key is used to conrm a MENU or a selection;
- the ESC is used to return to the previous menu display at any time during programming to alter data that has been input incorrectly.
• Whenever the keyboard is not used for about 3 ½ minutes, the display goes dark to reduce consumption.
• In a blackout and therefore with no reception by the stove, the display goes dark after about 20 seconds.
SET
OPT
ESC
MENU
Remote control
MENU
• SELECT LANGUAGE
LANGUAGE ENGLISH
LANGUAGE ITALIANO
LANGUAGE DEUTSCH
LANGUAGE FRANCAIS
SET
• SET CHRONO
• SET CLOCK
DAY MONDAY
DAY TUESDAY
DAY WEDNESDAY
DAY THURSDAY
DAY FRIDAY
DAY SATURDAY
DAY SUNDAY
PROGRAM DAY
PROGRAM WEEK
PROGRAM WEEK-END
• PARAMETER MENU
SETTINGS FACTORY > key access
DATA BANK > key access
SETTINGS LOAD > key access
SETTINGS SMOKE EXT > key access
MULTIFUOCO V1 > key access
RESET PARTHOUR > key access
RESET ALARM > key access
MEMORY COUNTERS
• ENABLE BEEP
• STATE STOVE
• ESC
MODE BEEP - ON ÷ OFF
SET
• UNIT OF MEASUREM
SET
SET
TOTAL HOURS
PARTIAL HOURS
NUMBER OF STARTS
“LAST 5 ALARMS”
SET
• MULTICOMFORT
SET
POWER OUTAGE
RESTART P2
RESTART P3
RESTART P4
RESTART OFF
SET
EXTERNAL THERMOSTAT
MODULATE
STAND-BY
SHUT DOWN
SET
SELECT RRC
SELECT STOVE
SET
• ENERGY SAVING
START
STOP
SET
F
C
SET
H07031310 / DT2002112 – 00
37
English