Operating Instructions and Installation Instructions

UNIT OF MEASUREMENT
Function Action Display
Selecting the UNIT OF
MEASUREM menu
Press the MENU button, use the MENU SELECTION button to select the
UNIT OF MEASUREM menu and the SET button to conrm.
UNIT OF
MEASUREM.
1
FUNCTION
ENABLED
1
UNIT OF
MEASUREM.
1
F
Selecting the unit
of temperature
measurement
Scroll with the MENU SELECTION button to nd the required unit of
temperature (F - Fahrenheit o C - Celsius) and conrm with the SET button.
UNIT OF
MEASUREM.
1
FUNCTION
ENABLED
1
UNIT OF
MEASUREM.
1
F
After conrmation the readout FUNCTION ENABLED appears on the
display, which then automatically returns to the initial readout.
UNIT OF
MEASUREM.
1
FUNCTION
ENABLED
1
UNIT OF
MEASUREM.
1
F
DT2040064-03
DT2011296-00
6.10 SETTING UNIT OF TEMPERATURE MEASUREMENT
This function allows the unit of temperature measurement in CELSIUS or in FAHRENHEIT to be set on the display.
Function Action Display
Set the day
Press the MENU key, select the SET CLOCK menu using the SELECT MENU
key, then conrm by pressing the SET key.
SET
CLOCK
DAY
MONDAY
HOURS
CLOCK
12:
MINUTES
CLOCK
:01
1
1
1
1
DT2011296-00
6.9 PROGRAMMING THE CLOCK
The stove leaves the factory with the clock already set. All that needs to be done, therefore, is to check that the time is precise or if any change is
needed because of summer time.
Correct time setting is necessary to be able to use all the functions where time is involved.
Setting the clock entails programming the following values: day, hour and minutes.
These values are displayed in sequence upon pressing the SELECTOR key.
SET CLOCK (current day/time)
H07031310 / DT2002112 – 00
38
English