Operating Instructions and Installation Instructions

DT2010242-05
6.11 TIMER
The timer allows the user to programme the stove to start up and shut down automatically without any manual intervention.
Daily, weekly and weekend programmes can be selected with a maximum of two operating cycles in two separate timetable bands.
For example: Cycle 1: from 6:00h until 9:00h.
Cycle 2: from 20:30h until 23:00h.
• In the DAILY programme the two timetable bands once established can be activated or deactivated for all the days of the week.
For example: if you want the stove to operate from 6:00 to 9:00 every day
• In the WEEKLY programme the two timetable bands once established can be activated or deactivated for each day.
For example: if you want the stove to operate from 6:00 to 9:00 on Monday, Tuesday, but not on Wednesday, and so on.
• In the WEEKEND programme the two timetable bands once established can be activated or deactivated for Friday, Saturday and Sunday.
For example: if you want the stove to operate from 6:00 to 9:00 on Friday, Saturday, but not on Sunday.
This kind of timer allows you to have three programmes (DAILY, WEEKLY and WEEKEND) stored permanently. The programmes can be activated or
deactivated using the SET TIMER menu. It is advisable to have only one programme active at a time to avoid overlapping.
a WHEN USING THE TIMER FOR THE FIRST TIME, SET THE CLOCK WITH THE CURRENT DAY, HOUR AND MINUTES, as with a new watch. To
set the actual time, see the table SETTING THE CLOCK. This setting will only be necessary the rst time of activating the clock.
a Using timed start ignites the stove only when the stove is set to the OFF position. For example, if the stove was just turned off and is
in the CLEANING phase, when the programmed start time arrive the stove will not start.
Conrm setting and
move to next section
Press the SELECT MENU key and set the “DAY”.
Conrm by pressing the SET key.
SET
CLOCK
DAY
MONDAY
HOURS
CLOCK
12:
MINUTES
CLOCK
:01
1
1
1
1
Set the hour
Press the SELECT MENU key and set the current “HOUR”. Conrm by
pressing the SET key.
Hours are expressed under the 24 hour format.
SET
CLOCK
DAY
MONDAY
HOURS
CLOCK
12:
MINUTES
CLOCK
:01
1
1
1
1
Set the minutes
Press the SELECT MENU key and set the “MINUTES”. Conrm by pressing
the SET key. After conrmation the initial display will reappear.
SET
CLOCK
DAY
MONDAY
HOURS
CLOCK
12:
MINUTES
CLOCK
:01
1
1
1
1
DT2040064-03
H07031310 / DT2002112 – 00
39
English