Manualshelf

Operation Manual

ManualsBrandsPiazzetta ManualsAir ConditioningP963 M
31323334353637383940
STARTUP
Action Description Display
Hold the ON/OFF key
down for several
seconds
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
A cycle starts with three phases which take the stove into the normal
operating mode:
CONTROL (rst 20 seconds)
• The lighter (glow plug) activates.
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
START PHASE I
• The extractor fan starts up.
• The fuel-loading auger is activated and starts to feed pellets into the
grate.
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
START PHASE II
• If the lighter has triggered the combustion process, the fuel-loading auger
increases to allow a period of stabilisation and correct combustion of the pellets
in the subsequent normal operating mode.
• If during the startup phase the sensor on the ue gas outlet shows a rise in
temperature (sign that the combustion process is underway), the stove is
considered to be lit and goes into the normal operating mode.
DT2040051-07
1
1
1
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
Action Description Display
Once the startup cycle has been completed successfully the stove
stabilises in the normal operating mode.
The power, fan speed and room temperature may be adjusted during
normal operation.
Shown is an example of the INITIAL DISPLAY in normal operation.
1
1
1
1
1
1
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
MAX VENT
FLUE COOL
12:00 79F
Press the
POWER
key and
select
POWER
To adjust the power, press the POWER key and select the desired setting
by pressing the SELECT key.
After the desired setting has been selected the remote control returns to
the INITIAL DISPLAY.
1
1
1
1
1
1
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
MAX VENT
FLUE COOL
12:00 79F
NORMAL OPERATION
H07032120 / DT2002308 – 00
31
English