Operation Manual

ENERGY SAVING
Function Action Display
Select the ENERGY
SAVING menu
Press the MENU key, then using the SELECT MENU key select the ENERGY
SAVING function and conrm by pressing the SET key.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
Select the value to
be set for shutdown
temperature
Press the SELECT MENU key and then select the temperature set point 2,
4 or 6 °F (1, 2 or 3 °C) or disable the function by selecting OFF.
Conrm by pressing the SET key.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
Select the value to
be set for ignition
temperature
Press the SELECT MENU key and then select the temperature set point 2,
4 or 6 °F (1, 2 or 3 °C) or disable the function by selecting OFF.
Conrm by pressing the SET key.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
After conrmation using the SET key, the readout FUNCTION ENABLED is
displayed and the readout ENS (ENERGY SAVING) appears on the main
display.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
Upon reaching the temperature set in the STOP function, the stove starts
the shutdown stage.
The readout ENERGY SAVING OK appears on the display.
1
1
1
1
1
ENERGY
S AVING
S TOP
S TART
OFF
ENS P2
LEVEL
ENERGY
S AVING OK
12:00 73F
12:00 73F
2F
DT2040124-00
If the room temperature continues to rise with operation at power level 1 up to the value set on the STOP function (e.g. +4 °F / +2 °C compared to
the programmed temperature), the stove shuts down and goes into the stand-by mode.
When the room temperature measured by the room sensor or the remote control drops to the temperature value set by the user on the START
function (e.g. -6 °F / -3 °C compared to the programmed temperature), the stove starts a new ignition phase and goes back to the power level
previously set by the user.
a The stove only restarts when the temperatures measured on the actual stove allow its use in all safety.
If the STOP and OFF functions are enabled, upon reaching the programmed room temperature, the stove will operate in the conventional way by
going to power level 1 without shutting down.
Likewise with the START and OFF enabled the stove does not start the startup/ignition phase after automatic shutdown and will remain off.
If the ENERGY SAVING has been set, the chrono mode handles only the start and stop of the programmed time slots.
a The external thermostat cannot be activated if the ENERGY SAVING is active.
H07032120 / DT2002308 – 00
48
English