User's Manual
10
Trapmate Mini Pull-Magnet Installation:
The Trapmate Mini is supplied with a pull-magnet kit for users who choose to use the reed switch option.
Step 1: Locate the pull-magnet kit and take out the magnet mount while setting the other items o to the side.
Step 2: On the back edge of the cover there will be small notch that shows the reed switch centering location.
Clean this area below the notch with 70% isopropyl alcohol for proper bonding of the mount.
Step 3: Peel the backing o the magnet mount and ax to rear of case as shown. The mount should be centered
on the notch and just below the seam of the top and bottom of the case.
Clean Area