User's Manual
8
Trapmate Mini Installation:
The Trapmate Mini can be installed using various methods including, but not limited to, the following two ex-
amples using the supplied mounting accessories:
Method 1 : Self-Stick Mounting Magnets
Step 1: In the accessory kit, locate the four self-stick mounting magnets.
Step 2: Clean the four circular recessed areas on the back of the Trapmate Mini with 70% isopropyl alcohol for
proper bonding of the magnets.
Step 3: Peel o the adhesive backing paper on the magnets and ax them to the circular recessed areas cleaned
in Step 2.
Step 4: The Trapmate Mini is ready to be mounted. Make sure the area where the Trapmate Mini will be attached
is ferrous, iron or steel.
Attach to
Iron
or
Steel