User manual

10
. Item code: BH163 DORNIER DO335
Fuselage top side
Connector
Servo arm
Cut
Elevator pushrod
Secure.
Cut
Attach the stabilizer
to the fuselage.
Fuselage top side
3) Elevator c
same way as the aileron before (see page 6).
ontrol horns, linkages are installed the
Fuselage bottom side
8. INSTALLING THE WHEEL WELL
Wheel well
Trim and remove
the covering
Wing bottom view
C/A glue
Repeat the procedure to install the opposite gear
* Using a modeling knife,
carefully remove the film
covering from the wing gear
tray. Make sure that you do not
remove any wood.
Fuselage bottom side
A+B glueEpoxy
Silicone Tube
Elevator pushrod