Brochure

For regular blade (ATO/ATC) and mini blade (ATM) fuses. Use with the Pico current
probes for fuse-based diagnosis (see tutorials on picoauto.com) and measurements.
For standard 2-pin sensors and actuators.
With 4mm plugs to connect to PicoScope test leads.
FUSE EXTENSION LEADS
2-PIN BREAKOUT LEAD
The TA168 JCASE fuse extension lead is
designed to be used with standard and
low profile JCASE fuses. JCASE is a
cartridge style fuse with female terminal
design, providing both increased time delay
and low voltage drop to protect high current
circuits & handle inrush currents.
Like our regular blade (ATO/ATC) and mini blade extension
leads, use with the Pico current clamps for fuse-based diagnosis
(see tutorials on picoauto.com) and measurements.
JCASE FUSE EXTENSION LEAD
Fuse extension leads PP408 £35 $57.75 ¤42.35
JCASE fuse extension lead TA168 £20 $33.00 ¤24.20
2-pin breakout lead TA012 £25 $41.25 ¤30.25
High bandwidth and fault protected 10:1
attenuator for use with the PicoScope 4225
and 4425 (and other scopes). It has high input
impedance to reduce load on the circuit being
measured.
10:1 ATTENUATOR
10:1 Attenuator (each) TA197 £39 $64.35 ¤47.19
MAXI FUSE
The TA206 maxi fuse extension lead is designed to be used with standard maxi
automotive fuses. The maxi fuse is a large blade-style fuse used to protect high-current
circuits and handle large inrush currents on some vehicles.
Maxi fuse extension lead TA206 £40 $66 ¤48
NEW