Datasheet

PicoScope
6402C
PicoScope
6402D
PicoScope
6403C
PicoScope
6403D
PicoScope
6404C
PicoScope
6404D
VERTICAL
Input channels 4, BNC connectors, single-ended
Analog bandwidth (-3 dB)
250 MHz (TA150 probes/50 Ω)
200 MHz (±50 mV range)
350 MHz (TA150 probes/50 Ω)
250 MHz (±50 mV range)
500 MHz (TA133 probes/50 Ω)
(all ranges)
Bandwidth limiting
20 MHz, switchable 20 MHz, switchable 25 MHz, switchable
Rise time (10% to 90%, calculated)
1.4 ns (50 mV range 1.8 ns) 1.0 ns (50 mV range 1.4 ns) 0.7 ns (all ranges)
Input ranges (full scale) ±50 mV to ±20V, in 9 ranges (1 MΩ input), ±50 mV to ±5V, in 7 ranges (50 Ω input)
Input sensitivity 10 mV/div to 4 V/div at x1 zoom (1 MΩ input), 10 mV/div to 1 V/div at x1 zoom (50 Ω input)
Input coupling 1 MΩ (AC or DC), 50 Ω (DC only)
Input characteristics 1 MΩ || 15 pF, or 50 Ω ±2% 1 MΩ || 10 pF, or 50 Ω ±2%
Analog offset range
Input range Offset range
50 to 200 mV ±0.5 V
500 mV ±2.5 V
1 V ±2.5 V
2 V ±2.5 V
5 V ±20 V (50 Ω: ±0.5 V)
10 V ±20 V
20 V ±20 V
Input range Offset range
50 to 200 mV ±2 V
500 mV ±10 V (50 Ω: ±5 V)
1 V ±10 V (50 Ω: ±4.5 V)
2 V ±10 V (50 Ω: ±3.5 V)
5 V ±35 V (50 Ω: ±0.5 V)
10 V ±30 V
20 V ±20 V
DC accuracy 3% of full scale
Overvoltage protection ±100 V to ground (1 MΩ inputs), 5.5 V RMS (50 Ω inputs)
DYNAMIC PERFORMANCE
Noise 200 μV RMS (50 mV range) 320 μV RMS (50 mV range)
THD –55 dB typical –54 dB typical
SFDR 60 dB typical 55 dB typical
Crosstalk
17 000:1 typical at 20 MHz
1000:1 typical at full bandwidth
5600:1 typical at 20 MHz
560:1 typical at full bandwidth
HORIZONTAL (TIMEBASE)
Timebase ranges
1 ns/div to 5000 s/div (real-time sampling)
50 ps/div to 100 ns/div (equivalent-time sampling / ETS)
Timebase accuracy ±2 ppm
Timebase ageing 1 ppm per year
ACQUISITION
ADC resolution 8 bits (up to 12 bits using software resolution enhancement)
Maximum real-time sampling rate
1 channel 5 GS/s
2 channels (A+C, A+D, B+C or B+D) 2.5 GS/s
2 channels (A+B or C+D), 3 or 4 channels 1.25 GS/s
Maximum ETS rate 50 GS/s (any number of channels)
Maximum streaming data rate (PicoScope 6) 10 MS/s
Maximum streaming data rate (SDK)
Data transfer > 150 MS/s, streaming to SSD hard drive 78 MS/s
(USB 3.0, PC-dependent, subject to application loadings)
Buffer size (shared between active channels) 256 MS 512 MS 512 MS 1 GS 1 GS 2 GS
Buffer size (streaming mode) 100 MS in PicoScope software. Up to available PC memory when using SDK.
Max. buffer segments (using PicoScope 6) 10 000
Max. buffer segments (using SDK) 250 000 500 000 500 000 1 000 000 1 000 000 2 000 000
TRIGGERING
Sources Ch A, Ch B, Ch C, Ch D, AUX In
Trigger modes None, single, repeat, auto, rapid (segmented memory), ETS
Advanced trigger types (real-time mode) Edge, pulse width, window, window pulse width, dropout, window dropout, level, interval, logic level, runt pulse
Trigger types (ETS mode) Rising edge, falling edge
Trigger sensitivity 1 LSB accuracy up to full bandwidth of scope
Trigger level Adjustable over whole of selected voltage range
Maximum pre-trigger capture 100% of capture size
Maximum post-trigger delay 4 billion samples
Re-arm time Less than 1 μs on fastest timebase
Maximum trigger rate Up to 10,000 waveforms in a 10 ms burst
Trigger timing resolution 1 sample period
AUX TRIGGER INPUT
AUX trigger connector type Rear panel BNC, shared with reference clock input
Trigger types Edge, pulse width, dropout, interval, logic
Input characteristics 50 Ω ±1%, DC coupled
Bandwidth 25 MHz
Threshold range ±1 V
Overvoltage protection ±5 V (DC + AC peak)
REFERENCE CLOCK INPUT (SDK ONLY)
Clock input characteristics 50 Ω, BNC, ±1 V, DC coupled
Frequency range 5, 10, 20, 25 MHz, user-selectable
Connector Rear panel BNC, shared with AUX trigger
Level Adjustable threshold, ±1 V
Overvoltage protection ±5 V
PicoScope 6000 Series Specifications