Datasheet

PicoScope
6402C
PicoScope
6402D
PicoScope
6403C
PicoScope
6403D
PicoScope
6404C
PicoScope
6404D
FUNCTION GENERATOR
Standard signal frequency DC to 20 MHz
Standard output signals All models
D models only
Sine, square, triangle, DC
Ramp, sinc, Gaussian, half-sine, white noise, PRBS
Output frequency accuracy Same as scope timebase accuracy
Output frequency resolution < 0.05 Hz
Output voltage adjustment
Amplitude adjustment: ±2 V (4 V max. p-p)
Offset adjustment: ±1 V
Maximum combined output voltage: ±2.5 V
DC accuracy ±1% of full scale
Connector type Rear panel BNC
Output impedance 50 Ω
Overvoltage protection ±5 V
Sweep modes Up, down, or dual, with selectable start/stop frequencies and increments
Signal generator triggering Scope, manual, or AUX input; programmable number of cycles from 1 to 2
30
–1
ARBITRARY WAVEFORM GENERATOR (AWG)
Buffer size
-
64 kS
-
64 kS
-
64 kS
Sample rate 200 MS/s 200 MS/s 200 MS/s
Resolution 12 bits 12 bits 12 bits
Bandwidth 20 MHz 20 MHz 20 MHz
PROBE COMPENSATION OUTPUT
Impedance 600 Ω
Frequency 1 kHz square wave
Level 2 V pk-pk
Overvoltage protection ±5 V (DC + AC peak)
SPECTRUM ANALYZER
Frequency range DC to 250 MHz DC to 350 MHz DC to 500 MHz
Display modes Magnitude, average, peak hold
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top
Number of FFT points Selectable power of 2 from 2
7
to 2
20
MATH CHANNELS
Functions
−x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin,
arccos, arctan, sinh, cosh, tanh, freq, derivative, integral, min, max, average, peak, delay
Operands Input channels A to D, reference waveforms, time, π
AUTOMATIC MEASUREMENTS
Scope mode
AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse
width, low pulse width, maximum, minimum, peak-to-peak, rise time and rising rate
Spectrum mode
Frequency at peak, amplitude at peak, average amplitude at peak,
total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR and IMD
Statistics Minimum, maximum, average, and standard deviation
SERIAL BUS DECODING
Data formats CAN, LIN, I
2
C, I
2
S, UART/RS-232, SPI, FlexRay
MASK LIMIT TESTING
Statistics Pass/fail, failure count, total count
DISPLAY
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, custom, or none
GENERAL
PC connectivity USB 3.0 (USB 2.0 compatible)
Export data formats Comma-separated values (CSV), tab delimited (TXT), BMP, GIF, PNG, MATLAB 4 format (MAT)
Power requirement 12V DC, 4A max. AC adaptor and cable supplied
Dimensions (inc. connectors & end caps) 170 x 255 x 40 mm 170 x 285 x 40 mm
Weight 1 kg (approx. 2 lb 3 oz) 1.3 kg (approx. 2 lb 14 oz)
Temperature range Operating: 0 °C to 40 °C (20 °C to 30 °C for stated accuracy). Storage: −20 °C to +60 °C.
Humidity range Operating: 5% to 80% RH non-condensing. Storage: 5% to 95% RH non-condensing.
Compliance EU: EMC, LVD, RoHS, WEEE. USA: FCC Part 15 Subpart B
Safety approvals Designed to EN 61010-1:2010
PC requirements Microsoft Windows XP, Windows Vista, Windows 7, or Windows 8 (not Windows RT)
Software included PicoScope 6, Windows SDK and example programs
Languages supported (software)
Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek,
Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Spanish, Swedish, Turkish
Languages supported (help) English, French, German, Italian, Spanish