Information

Technical reference26

3.4.5

LabVIEW

The routines described here were tested using LabVIEW version 4.0.

While it is possible to access all of the driver routines described earlier, it is easier to

use the special LabVIEW access routines if only single readings are required. The

pl1000.llb library in the installation directory shows how to access these routines.

To use these routines, copy pl1000.llb and pl1000.dll to your LabVIEW user.

lib directory. You will then find a sub-vi to access the logger, and some example

sub-vis which demonstrate how to use it.

You can use one of these sub-vis for each of the channels that you wish to measure.

The sub-vi accepts the port and channel (1 to 11) and returns a voltage.

3.4.6

Visual Basic

Version 4 and 5 (32-bit)

The installation directory contains the following files:

pl100032.VBP

pl100032.BAS

pl100032.FRM

3.4.7

Agilent-VEE

The example routine pl1000.vee is in the installation directory. It was tested using

Agilent VEE version 5. The example shows how to collect a block of data from the

ADC.