Manualshelf

User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentDrDAQ® USB data logger, oscilloscope attachment, data logger, signal generator
11121314151617181920
Table Of Contents
Product information10
Copyright © 2011 Pico Technology Ltd. All rights reserved.usbdrdaq.en
3.3.6
Adjusting the RGB LED
Note: When
Enable LED Control
is active, the LED will not flash when sampling.
The USB DrDAQ units include an RGB LED. The colour of this LED can be changed, to
do this click the LED icon above the oscilloscope window. The following drop down will
appear:
Clicking 'Enable LED Control' will show the numerical values for the LED to be
displayed RED:
The colour of the LED is adjusted by dragging the individual colour and brightness
sliders, entering specific RGB values, or clicking within the colour disc.