User manual

PicoScope 3000 A and B Series PC Oscilloscopes and MSOs User's Guide 3

2.3

FCC notice

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his or her own

expense.

For safety and maintenance information see the safety warning .

2.4

CE notice

The PicoScope 3000 A and B Series PC Oscilloscopes meet the intent of the EMC

directive 89/336/EEC and have been tested to EN61326-1:2006 Class A

Emissions and Immunity standard.

The product also meets the intent of the Low Voltage Directive and has been

designed to meet BS EN 61010-1:2010 Safety requirements for electrical

equipment for measurement, control, and laboratory use standard.