Manualshelf

User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 6402D 250 MHz 8-channel 5 null 512 null 8 Bit Digital storage (DSO), Function generator,
131132133134135136137138139140
Toolbars and buttons128
Copyright © 2007-2013 Pico Technology Ltd. All rights reserved.psw.en r32
7.7
Signal Generator button
The Signal Generator button allows you to set up your scope device's test signal
generator, if it has one, or the demo signal settings if PicoScope is in demo mode.
If your scope has a built-in signal generator then clicking the Signal Generator
button opens the Signal Generator dialog.
If PicoScope is in demo mode then clicking the Signal Generator button opens the
Demo Signals menu.
7.7.1
Signal Generator dialog (PicoScope devices)
Location:
Signal Generator button on the toolbar
Purpose:
controls the scope device's built-in signal generator
Not all scope devices have a signal generator, and those that do have a varying range
of controls in the signal generator dialog. See the Device feature table for details.