User manual

PicoScope and oscilloscope primer12

5.5

Scope view

A scope view shows the data captured from the scope as a graph of signal amplitude

against time. (See Oscilloscope basics for more on these concepts.) PicoScope opens

with a single view, but you can add more views by using the views menu. Similar to

the screen of a conventional oscilloscope, a scope view shows you one or more

waveforms with a common horizontal time axis, with signal level shown on one or

more vertical axes. Each view can have as many waveforms as the scope device has

channels. Click on one of the labels below to learn more about a feature.

Scope views are available regardless of which mode - scope mode or spectrum mode -

is active.