Manualshelf

User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 6402D 250 MHz 8-channel 5 null 512 null 8 Bit Digital storage (DSO), Function generator,
31323334353637383940
PicoScope 6 User's Guide 31
Copyright © 2007-2013 Pico Technology Ltd. All rights reserved. psw.en r32
5.24
Alarms
Alarms are actions that PicoScope can be programmed to execute when certain
events occur. Use the Tools > Alarms command to open the Alarms dialog, which
configures this function.
The events that can trigger an alarm are:
Capture - when the oscilloscope has captured a complete waveform or block of
waveforms.
Buffers Full - when the waveform buffer becomes full.
Mask(s) Fail - when a waveform fails a mask limit test.
The actions that PicoScope can execute are:
Beep
Play Sound
Stop Capture
Restart Capture
Run Executable
Save Current Buffer
Save All Buffers
See Alarms dialog for more details.