User manual

Menus82

6.5.4.5

SPI Settings dialog

Location:

Serial Decoding dialog > select SPI format > Settings

Purpose:

sets up parameters of your SPI data format so PicoScope can decode

the data

Sample Clock on:

Which edge of the clock to use.

Chip Select State:

The polarity of the chip select (CS) signal, if used.

Data bits:

The number of bits in the word. Choose from the drop-down

list or type a number directly into the box.

Bit Order:

Whether the least-significant or the most-significant bit

occurs first.

Details of SPI protocol

6.5.4.6 I²C Settings dialog

Location:

Serial Decoding dialog > select I

C format > Settings

Purpose:

sets up parameters of your I

C data format so PicoScope can decode the

data

Display Address as:

7 bit Slave Address: displays as an 8-bit number by adding

leading zeroes to the 7-bit address.

8 bit Read/Write Address: displays as an 8-bit number

considering the Read/Write~ bit.

Details of I²C protocol