Datasheet

PRODUCT SELECTOR
MODEL
PicoScope
2204A
PicoScope
2205A
PicoScope
2206A
PicoScope
2207A
PicoScope
2208A
Bandwidth (-3 dB) 10 MHz 25 MHz 50 MHz 100 MHz 200 MHz
Maximum sampling rate 100 MS/s 200 MS/s 500 MS/s 1 GS/s 1 GS/s
Buffer memory 8 kS 16 kS 32 kS 40 kS 48 kS
Function generator + AWG 100 kHz 100 kHz 1 MHz 1 MHz 1 MHz
DETAILED SPECIFICATIONS
VERTICAL
Input channels 2
Bandwidth (-3 dB) 10 MHz 25 MHz 50 MHz 100 MHz 200 MHz
Rise time (calculated) 35 ns 14 ns 7 ns 3.5 ns 1.75 ns
Vertical resolution 8 bits
Enhanced vertical resolution Up to 12 bits
Input ranges ±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V, ±20 V
Input sensitivity 10 mV/div to 4 V/div (10 vertical divisions)
Input coupling AC / DC
Input characteristics BNC, 1 MΩ ∥ 14 pF BNC, 1 MΩ ∥ 13 pF
Analog offset range
(vertical position adjustment)
-
±250 mV (50 mV to 200 mV ranges)
±2.5 V (500 mV to 2 V ranges)
±20 V (5 V to 20 V ranges)
DC accuracy ±3% of full scale
Overvoltage protection ±100 V (DC + AC peak)
HORIZONTAL (TIMEBASE)
Maximum sampling rate 1 ch.
(real-time) 2 ch.
100 MS/s
50 MS/s
200 MS/s (ChA)
100 MS/s
500 MS/s
250 MS/s
1 GS/s
500 MS/s
1 GS/s
500 MS/s
Equivalent sampling rate (ETS) 2 GS/s 4 GS/s 5 GS/s 10 GS/s 10 GS/s
Maximum sampling rate (streaming) 1 MS/s 9.6 MS/s
Timebase ranges 10 ns to 5000 s/div 5 ns to 5000 s/div 2 ns to 5000 s/div 1 ns to 5000 s/div 500 ps to 5000 s/div
Buffer memory
(shared between active channels)
8 kS 16 kS 32 kS 40 kS 48 kS
Buffer memory (streaming mode)
2 MS per channel in PicoScope software. 100 MS (shared) in PicoScope software.
Up to available PC memory when using SDK.
Maximum buffers (normal triggering) 10 000
Max. buffers (rapid block triggering) Not available 32
Timebase accuracy ±100 ppm ±50 ppm
Sample jitter < 30 ps RMS < 5 ps RMS
DYNAMIC PERFORMANCE (typical)
Crosstalk (full bandwidth) Better than 200:1 (equal ranges) Better than 400:1 (equal ranges)
Harmonic distortion < –50 dB at 100 kHz, full-scale input
SFDR > 52 dB at 100 kHz, full-scale input
Noise < 150 µV RMS (±50 mV range) < 200 µV RMS (±50 mV range)
Bandwidth flatness (at scope input) (+0.3 dB, –3 dB) from DC to full bandwidth
TRIGGERING
Sources Ch A, Ch B
Trigger modes None, auto, repeat, single None, auto, repeat, single, rapid (segmented memory)
Advanced triggers Edge, window, pulse width, window pulse width, dropout, window dropout, interval, logic.
Trigger types, ETS Rising or falling edge
Trigger sensitivity
Digital triggering provides 1 LSB accuracy up to full bandwidth
In ETS mode, typical 10 mV p-p at full bandwidth
Maximum pre-trigger capture 100% of capture size
Maximum post-trigger delay 4 billion samples
Trigger re-arm time PC-dependent < 2 μs on fastest timebase
Maximum trigger rate PC-dependent Up to 32 waveforms in a 64 μs burst
PicoScope 2200A Series Oscilloscopes - Specifications