User manual

Quick Start Guide PicoScope USB Oscilloscope

1 English

1.1 Introduction

Thank you for purchasing a Pico Technology PC Oscilloscope. This guide explains how

to install the software, including the product manual, from the disc supplied.

Once you have nished the basic installation, the User’s Guide and Data Sheet will

provide further information about setting up and using the oscilloscope.

1.2 Safety information

To prevent possible electrical shock, re, personal injury, or product damage, carefully

read this safety information before using the product. In addition, follow all generally

accepted safety practices and procedures for working with and around electricity.

The product has been designed and tested in accordance with the European standard

publication EN 61010-1:2010, and left the factory in a safe condition. The following

safety descriptions are found throughout this guide:

A WARNING identies conditions or practices that could result in injury or death.

A CAUTION identies conditions or practices that could result in damage to the

product or equipment to which it is connected.

Symbols

These safety and electrical symbols may appear on the product or in this guide.

Symbols Description

Direct current.

Alternating current.

Chassis ground terminal. This symbol is now used in place of the

equipotential symbol which may appear on older products.

Equipment protected throughout by double insulation or

reinforced insulation.

Possibility of electric shock.

Caution.

Static awareness. Static discharge can damage parts.

EN61010 measurement category.

Do not dispose of this product as unsorted municipal waste.