Information

8
are assigned to classes based on their hazard potential. The au-
thoritative documents on laser device assignments to the classes
1, 1M, 2, 2M, 3R, 3B and 4 are the DIN EN 60825-1 standard.
Please visit www.picotronic.de/picopage/en/index/safety for the
„Laser Radiation“ BGV B2 accident prevention regulations and
other documents on safe use of lasers
Observe the precautions stated in the accident prevention regu-
lations (BGV B2). These include the following:
• Do not look into the beam or direct reflections, also do
not look with optical instruments.
• Clear marking of the laser area with warning signs at all
access points.
• Route the laser beam clearly below or above eye level,
but not at eye level.
The owner/operator of the laser equipment is responsible for
compliance with protection measures. The owner/operator must,
among other things, ensure that the laser device is assigned
to a laser class and marked accordingly. Operations using laser
equipment classes 3R, 3B and 4 must be registered with the
trade supervisory office and the mutual indemnity association.
When operating lasers of these classes, the laser area must be
cordoned off and marked. Additionally, owners/operators of laser
equipment classes 3R, 3B and 4 must appoint an expert as the
laser protection officer.
Staff operating laser equipment classes 1M, 2, 2M, 3R, 3B or
4, or who have access to the laser area of laser classes 3R, 3B
and 4, must be instructed in the effects of laser radiation and
required protective measures.
The owner/operator must provide suitable laser goggles, pro-