User Manual

TECHNICAL DATA
Device designation: PIEPS FREERIDE
Transmission frequency: 457 kHz (intern. standard frequency)
Power supply: 1 battery, alkaline (AA), LR6, 1,5V
Battery lifetime: min. 200 Std. Sendebetrieb
Maximum range: 40 metres
Temperature range: -20°C to +45°C
Weight: 110 g
Dimensions: (L x W X H) 110 x 58 x 24 mm
Option pack: iProbe-Support
WARRANTY CONDITIONS
• The device is guaranteed by the manufacturer against defects in material
and workmanship for a period of two years from the date of purchase.
• This warranty does not apply to damage caused by incorrect use,
dropping or dismantling of the device by unauthorised persons.
• Any further warranty or liability for consequential damage is expressly excluded.
• Warranty claims should be addressed - enclosing the receipt of purchase –
to the relevant sales outlet or directly to PIEPS.
CERTIFICATION
Warning: Any changes or modications not expressly approved by the manufacturer,
responsible for compliance, could void the user`s autority to operate this device.
Europe: Manufacturer: PIEPS GmbH, Country of manufacture: Austria; Gerätetype:
PIEPS Freeride; The device conforms to the Standard ETS 300718 WEEE 2002/96/EC
Canada: IC: 7262A-FREE01; USA: FCC ID: REMFREE01, This device conforms to
Paragraph 15 of the FCC regulations.
Operation is subject to the following two conditions: 1) This device may not cause
hamful interference, and 2) this device must accept any interference received, including
interference thar may cause undesired operation.
CONFORMITY
PIEPS GmbH declares hereby, that the product PIEPS Freeride fulls all requirements and
regulations of directive 1999/5/EC! The declaration of conformity can be downloaded at
the following source: http://www.pieps.com/certication_pieps_dsp.pdf
MANUFACTURER, DISTRIBUTION & SERVICES
PIEPS GmbH, Frauentalerstraße 102, 8530 Deutschlandsberg, Austria
e-mail: of[e-mail], www.pieps.com
All information supplied without liability. Status september 2007.
SPECIFICATIONS