Pigtronix tm Keymaster User’s Guide All contents © Absara Audio LLC 2010
Index: Welcome………………………………………………………… Anatomy of the Keymaster……………………………..……. Notes. ……………………………………………………………. Limited Warranty……………………………………….…….… Safety Precautions………………………….,.…………….…..
Welcome! Thank you for entering the realm of Pigtronix. The Keymaster you now possess is a universal analog signal converter that will allow you to interface any audio source with instrument level “guitar” pedals and return your signal back to the proper impedance on its way back out of this crafty little box. The ability to run the loops in series or blend them in parallel will lead to new sonic possibilities using the gear you already own.
Anatomy of the Keymaster: The Interface: Jacks: 1. DC POWER 18-VOLTS – We suggest you use only the 18-Volt, 2.1mm negative tip power supply that came with your Keymaster. Using the wrong power supply is likely to result in a damaged pedal. 2. INPUT (BAL / UN-BAL) – Plug in your instrument here. TS or TRS ¼” 3. XLR INPUT – Plug mic / line level signals here. Note: XLR INPUT is bypassed when 1/4” input is in use. 4. OUTPUT (BAL / UN-BAL) – Plug in your amp, mixer, or DI box here. TS or TRS ¼” 5.
8. SEND B – Send to input of pedal chain for LOOP B 9. RETURN B – Return from pedal chain for LOOP B 10. EXP – This allows for expression pedal crossfade between the two loops in parallel mode. Footswitches: 11. LOOP A – Turns on LOOP A 12. LOOP B – Turns on LOOP B Knobs: 13. IN BOOST – Up to 10db of input gain going into the loops. 14. OUT BOOST – Up to 10db of output gain going out of the loops. 15.
Limited Warranty: Your Pigtronix effect pedal comes with a 1 year limited warranty on parts and workmanship. During the warranty period we will repair or replace, at our option, defective parts or pedals free of charge, and return them to the owner. Warranty service does not include damaged, modified, or misused pedals and such pedals will be subject to a standard repair charge. Contact us directly via email and describe the problem to us.
Safety Precautions: The safety precautions listed below are intended to ensure your safety whenever you use the REM. NEVER OPEN THE CASE – Never try to separate the two pieces of the chassis from one another and/or modify the equipment. Opening this device will effectively void the warranty. STOP USE IN CASE OF PROBLEM – Stop using the equipment if ever you should notice smoke or a strange odor coming from it. Contact Koltai@pigtronix.com for service.
