User Manual

9
Soft-touch MODE Switch
The soft-touch MODE switch located above the Loop 2 footswitch allows the Loop 2 footswitch
to be reassigned to perform alternate functions.
Pressing the MODE switch repeatedly will cycle through STOP, ONCE and OCTAVE functions
before returning to Loop 2 control.
Pressing and holding the MODE switch will turn on the UNDO/REDO mode.
Note: Turning UNDO/REDO mode on and off will clear all current loop audio.
STOP
Press to Stop at the end of the loop cycle.
Double-tap to Stop instantly.
Press and Hold to fade out.
Double-tap and Hold to Erase.
Press STOP during initial record to prevent playback when recording is closed.