User Manual

Table Of Contents

OCTAVE

Press to immediately switch sample rate to 24kHz.

Press again to immediately switch it back to 48kHz.

Press and Hold to change sample rate at the end of the loop cycle.

Note: - Default Sample rate is 48kHz.

Note: - The small red Octave LED will blink when the sample rate is switched to 24kHz

Note: - Sample rate can be changed during initial recording or overdub.

Note: - STOP, ONCE and OCTAVE functions can still be selected when UNDO / REDO

mode has been turned on.

Audio recorded at the default sample rate of 48kHz will play back one octave down when the

sample rate is changed to 24kHz.

Audio recorded at 24kHz will play back one octave up when the sample rate is changed to

48kHz.