User Manual

16
Power
Infinity 2 runs on a standard 9VDC 2.1mm Negative Tip power supply.
Current Draw is under 100mA.
USB firmware update
A micro USB port is provided for future firmware updates.
Check for firmware updates and the Infinity 2 Updater for PC here: www.pigtronix.com/Infinity2
In order to update the firmware on the SPL2, simply connect the unit to a PC with the
proper micro USB connector cable. Right-click and choose Run as Administrator to launch
the application. Click ”Refresh List” then select Infinity 2 from the ”Hardware List” drop
down menu. Select the firmware to upload and then click the Update Firmware button. The
unit will then automatically reboot with the new firmware loaded. DO NOT disconnect the
power to the Infinity 2 during the firmware update process.