User Manual

3
Loop 2 Footswitch
The pair of loops in the Infinity 2 are set to play in series for Verse/Chorus type arrangements.
The Loop 2 footswitch controls the looping actions for Loop 2, and functions the same way
as the Loop 1 footswitch (see above).
Pressing Loop 2 while Loop 1 is recording will cause Loop 1 to close and Loop 2 to begin
recording or playback immediately.
Pressing Loop 2 while Loop 1 is playing back will cause Loop 2 to begin recording or playback
at the end of Loop 1.
Pressing Loop 2 while Loop 1 is overdubbing will cause Loop 2 to begin recording or playback
at the end of Loop 1.
Pressing and holding the Loop 2 footswitch during initial recording will send Loop 2 straight
into overdub when the loop is closed.
All of these same rules apply to Loop 1.
It is possible to cancel a pending transition between loops by pressing the footswitch of the
currently playing loop.