User Manual

6
Recording
If there is no audio recorded on Loop 1, pressing the Loop 1 footswitch will begin recording
immediately.
Once the loop is recording, pressing the Loop 1 footswitch again will close the loop and begin
playback.
When recording on Loop 1, pressing the Loop 2 footswitch will close Loop 1, and will simul-
taneously begin recording or playback on Loop 2.
Overdub
During playback, pressing the Loop 1 footswitch will open an overdub layer on Loop 1 starting
at the beginning of the next loop cycle.
Once an overdub is recording, pressing the Loop 1 footswitch again will close that overdub
layer immediately.
Closing an overdub with a long press will cause the overdub to close at the end of the current
loop cycle.