User Manual

7
Pressing and holding the Loop 1 footswitch during initial recording will send Loop 1 straight
into overdub when the loop is closed.
Pressing and holding the Loop 1 footswitch during Loop 2 playback will send Loop 1 straight
into overdub at the loop boundary.
When recording an overdub, the overdub will not save until it is closed and a loop boundary
has been passed.
Pressing the loop footswitch during an overdub will close that overdub.
After closing an overdub you can choose to reopen it by pressing the loop footswitch as long
as the loop cycle hasnt ended yet.
At the end of the loop cycle, all audio recorded during that cycle is merged and saved as a
single overdub.