Datasheet

ManualsBrandsPiher-Amphenol ManualsPassive ComponentsRotary Potentiometer 500Ohm, 200mW, ±20 %

STANDARD



Modular gang type (

up to



Self extinguishable material UL 94-V0



Stop torque:

> 40 Ncm. ( >56 in-oz)



Torque:

0.5 to 1.5 Ncm.

(0.7 to 2.1 in-oz)



Electrical rotation angle:

280° ± 20°



Mechanical rotation angle:

300° ± 5°



Max. torque nut (binding out):

< 80 Ncm. (112 in-oz)

FEATURES

MECHANICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

PC-16

16 mm Carbon

Potentiometer



Equivalent Noise Resistance:



Operating temperature**:

25°C + 70°C (13°F + 158°F)

Model

PC-16

Serie

Terminals

Bushing diameter

Mounting style

M06

Shafts

Value

* Others upon request



Thrust and pull in the shaft:

> 25 N

www.piher.net

Bushless option available

Nut & washer

Switch

Stereo matching

Metalic support

OPTIONAL EXTRAS



Range of values (*)



Max. Voltage:

250 VDC (lin) 125 VDC (no lin)



Nominal Power 50°C (122°F) (see power rating curve)

0.2 W (lin) 0.1 W (no lin)



Tolerance (*):

± 20%

± 30%



Taper (*) (Log. & Alog. only Rn > 1K)

Lin ; Log; Alog.

S =Single

D =Tandem

T =Triple

C =Quad.

PC-16

I = PCB

C =

Solder Lugs

M04

M06

M07

M11

M17

P01

P22

---

(See note 3)

H= Horizontal

V = Vertical

(See note 1)

(See note 2)

203

(See note 4)

Others

tapers

on request

Bushless version

07 = M7

10 = M10

= Bushless

Taper

A = Linear

B = Log.

C = Alog.

Tolerance

2020 = +/- 20%

3030 = +/- 30%

2020

(See note 5)

(See note

10)

Mounting brackets

(See note 7)

Switch

I = PCB

C =

Solder lugs

(See note 9)

Nuts & Washers

-TA = loose nut & washer

MTA=assembled nut &

washer

-T- = loose nut

MT- = assembled nut

Shafts spec. leng.

XX.X

(See notes 6,9)

Stereo matching

3D = 3dB

4D = 4dB

6D = 6dB

(See note 8)

(See note

NOTES:

NOTE: The information contained here should be used for reference purposes only.

10 1

Number of zeros

(4)

Value:

(6)

Shaft special length:

(2)

Bushings: Type "10" has two paralell flat surfaces for avoiding rotation. Bushless option only available for single model.

(3)

M07 shaft is only available with M10 bushing. --- = no shaft

In models "D", "T", "C", with different values, they will be asked by drawings.

(1)

Mounting style: Type "V" is only available in model "S" potentiometer and with printed circuit terminals.

Example: +7%

-5%

07 05

negative tolerance

(5)

Tolerance (non standard), upon request.

positive tolerance

Code:

Example: Shaft Ø6.35 L= 24.5

M07 ..... 24.5

special length

shafts

NOTE: Maximun length recommended: L = 45

(7)

Mounting brackets: Only applicable for model "S", mounting "H" and without switch.

Maximun will be:

Stereo matching: not available for single models.

3dB for model "D"

(8)

4dB for model "T"

6dB for model "C"

Not available for Bushless version.

(9)

Switch option not available with antilog taper.

(10)

2 first digits of the value.

Code:

Only for special length and plain shafts (not knurled).



Residual resistance(*):

IP54 protection according to IEC 60529



Polyester substrate



Upon request:



Carbon resistive element



** Up to 85°C depending on application

HOW TO ORDER

Summary of content (6 pages)

PAGE 1
PC-16 16 mm Carbon Potentiometer FEATURES Carbon resistive element IP54 protection according to IEC 60529 Polyester substrate Modular gang type (up to 4) Self extinguishable material UL 94-V0 Upon request: Metalic support Stereo matching Switch Nut & washer Bushless option available Bushless version MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Mechanical rotation angle: 300° ± 5° Range of values (*) Electrical rotation angle: 280° ± 20° Tolerance (*): Torque: 0.
PAGE 2
STANDARD OPTIONS HOW TO ORDER CUSTOM DRAWING Shaft length .................................. 0 Standard Length Mounting brackets ........................ Without mounting brackets Stereo matching ........................... Only on request (see note 8) Switch ........................................... No switch Nut & washer ................................ Without nut and washer PC-16 S V + DRAWING NUMBER (Max.
PAGE 3
TERMINALS 16 2.4 I NUTS & WASHERS POWER RATING CURVE Standard Bushing 10 A = Linear B = Log. C = Alog. 12.5 1.1 -0.1 C TAPERS 16 8 Hole for wiring 18 2.4 -0.05 4 +0.1 16 Hole for heat dissipation (do not solder) 18 4 Hole for heat dissipation (do not solder) Bushing 07 W (%) 2.5 2.5 14 10 100 100 % C 80 A 60 40 0.5 0.5 40 % B 16 20 A E 0 25 M7 x 0.75 M10 x 0.75 50 75 10.3 10.3 C 50 100 70 7.
PAGE 4
SWITCH SPECIFICATIONS NOMINAL CURRENT CONTACT RESISTANCE (initial) OPERATING TORQUE OPERATING ANGLE TEST VOLTAGE PACKAGING Boxes of 100 pieces (single body model): Inner dimensions 250 x 160 x 95 mm METALIC SHAFTS STANDARD A A L 4 45 M04 6 45 M06 6.35 45 M07 CODE L A B C L A 2 5 7 15 M11 2 10 11 20 M12 4 12 14 25 M13 4 12 14 30 M14 4 12 14 35 M15 4 12 14 40 M16 4 12 14 45 M17 6 1 B +0.5 CODE L C SPECIAL 4 A A A 6 L +0.5 L +0.5 6.35 3.
PAGE 5
PLASTIC SHAFTS Ø 4 15 4 4 o 35 3 9 9 5 + 45 0.5 9 30 o + 17 0.5 4 P07 P08 o 3.7 3 o 60 71 2.8 P04 8 3 + 20 0.5 9 4 9 4 +0.5 12.7 + 17 0.5 P21 P10 PLASTIC SHAFTS Ø 6 1 9 9 9 + 35.5 0.5 + 45 0.5 6 6.25 31,5 22 P05 o 30 + 20 0.5 6 P06 P11 4.6 6 4.6 7o 6 4.6 12 9 12 o 60 + 21.5 0.5 15 9 + 32 0.5 9 6 P12 P13 4.6 12 9 P14 8.5 9 6 + 25 0.5 o 15 + 27.5 0.5 21.5 9 6 +0.5 P15 19 6 ±0.5 P16 P17 30° 6 8 9 18.5 +0.5 9 +0.
PAGE 6
Disclaimer The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein.