Datasheet

ManualsBrandsPiher-Amphenol ManualsPassive ComponentsShaft knob for trimmer PT 10 Grey

FEATURES

MECHANICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

(*) Others upon request

HOW TO ORDER

PT-10

(See note 8)

Torque

 = Standard

L= Low Torque

Mounting

Method

Code

(See note 9)



Equivalent Noise Resistance:



Operating temperature(**):

-25°C + 70°C (-13°F + 158°F)

H01

H01 H2.5

H05 H5

H02 H2.5P

H10 H5P

V05 V5

V10 V

V11 VP

V13 VJ

Rotors

(See note 1)

PT 10

Series

PT-10

101

Value

Taper

A = Lin.

B = Log.

C = Alog.

Detents

Magazine

Cut track

PCI = Initial

PCF = Final

Life

E= Long life

Shaft/rotor colour

RO = Red

NE = Black

VE = Green

AM = Yellow

AZ = Blue

MA = Brown

GR = Grey

NA = Orange

CR = Cream

Wiper position

PM = 50%

PF = Final

2020

Tolerance

2020 = ± 20%

3030 = ± 30%

www.piher.net

(See note 10)

(See note 2 /

SMD version

available: see

product PS-10)

PAI

PAM

PAF

P1F

P02

P16

000 = CM



Electrical rotation angle:

220° ± 20°



Life(*):

Up to 10K cycles

(**) Up to 85°C depending on application

10 mm Carbon

Potentiometer

OPTIONAL EXTRAS

v091014



Range of values (*)



Max. Voltage:

200 VDC (lin) 100 VDC (no lin)



Nominal Power 50°C (122°F) (see power rating curve)

0.15 W (lin) 0.07 W (no lin)



Tolerance (*):

± 20%

± 30%



Taper (*) (Log. & Alog. only Rn 1K)

Lin ; Log; Alog.

(See note 3)

(See note 4)

(See note 5)

(See note 6)

(See note 7)

Shaft/Thum.

01 = Fig. 1

02 = Fig. 2

17 = Fig. 17

Flammability

I =

Non flammable



Stop torque:

> 5 Ncm. ( >7 in-oz)



Torque:

0.4 to 2 Ncm.

(0.6 to 2.7 in-oz)



Mechanical rotation angle:

235° ± 5°

101 = 100

504 = 500 K

505 = 5 M



Residual resistance(*):

NOTE: The information contained here should be used for reference purposes only.

 Carbon resistive element



IP54 protection according to IEC 60529

 Polyester substrate

 Also upon request:

Wiper positioned at 50% or fully clockwise.

Supplied in magazines for automatic insertion.

Long life model for low cost control potentiometer applications

Self extinguishable plastic UL 94V-0

Cut track option

Special tapers

Mechanical detents

Low torque version

Special switch option

3% Linearity and 100K cycles mechanical life

SMD versión available (PS-10)

"Z" adjustment only available on "H" versions. Rotor "G" only available in purple (shaft/rotor colour "VI").

000 = CM = Switch version (contact us)

Potentiometer with shaft: only shaft

(10)

If you wish to use your own custom plastic shaft/knob/actuator please contact Piher for advice about compatible materials.

NOTES:

Cream colour only available in standard plastic.

(1)

(2) Terminals styles: "P" & "J" are crimped. V=Vertical adjust; H=Horizontal Adjust

Low Torque:

1 Ncm

No detent option available for low torque models.

(9)

Example: +7%

-5%

07 05

negative tolerance

(4)

Non standard tolerance, upon request.

(5)

(6) Magazines: not available with the H10, V05 and V13 models, nor with adjustment types X, W, Y, Z.

(7) Non flammable: housing, rotor and shaft. According to UL 94V-0

Example:

10 1

Numb of zeros

(3) Value

(8) Colour shaft/rotor:

 Standard = 500 cycles  Long = 10K cycles

Others upon request.

First two digits of the value.

Code:

positive tolerance

Code:

Potentiometer without shaft: only rotor

Summary of content (6 pages)

PAGE 1
PT-10 10 mm Carbon Potentiometer FEATURES Carbon resistive element IP54 protection according to IEC 60529 Polyester substrate Also upon request: Wiper positioned at 50% or fully clockwise. Supplied in magazines for automatic insertion.
PAGE 2
HOW TO ORDER CUSTOM DRAWING PT-10 LH 01 + STANDARD OPTIONS Cut track Detents Packing Non flammable Rotor colour Shaft colour Wiper position Torque Life DRAWING NUMBER (Max. 16 characters) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. No None Bulk No White Natural Initial Standard 500 cycles ROTORS Without shaft 4º 51. 7 1.6 1. 2 2.1 2.2 0.7 +0.1 2 0.8 With shaft 2 2.
PAGE 3
OPTIONS Positioning (Std. Position = CCW) P.M. 50% +20º P.F. INITIAL CCW FINAL CW CUT TRACK CCW on-off (A) CW on-off (E) A A S E A A = Initial E S E = Final E S = Wiper A E TAPERS Special taper example Standard 100% Rn A = Linear B = Log. C = Alog. C R 2 + 5% A B NOTE = Please note relative terminal positions when ordering non linear tapers. TESTS TYPICAL VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50°C; 0.15 W ±5 % MECHANICAL LIFE (CYCLES) 500 @ 10 CPM ...
PAGE 4
SHAFTS (for G and M rotor types, top view) Shafts, knobs & thumbweels are delivered at random position. Positioning available upon request. 3.1 5 8.1 5 2.6 3.7 8.4 34 10.4 10 3 Fig. 2 / Ref. 5053 4.9 Fig. 6 / Ref. 5035 8.1 4.9 2.6 25.5 25.5 Fig. 4 / Ref. 6053 12.5 4.9 15.2 4.9 Fig. 3 / Ref. 5012 6.75 Fig. 1 / Ref. 5016 Fig. 7 / Ref. 5115 Fig. 8 / Ref. 5116 Fig. 9 / Ref. 5119 Fig. 10 / Ref. 5120 Fig. 11 / Ref. 5027 2- GANG Plastic Knob/ Plastic Shaft* 4.9 25 4.5 13 6.
PAGE 5
DETENT CONFIGURATIONS EXAMPLES This innovative PT´s with detents family has been specifically developed to allow the integration of otherwise large and expensive external mechanisms into the body of the majority of the 10 & 15 mm. PS/PT/PTC potentiometer series thus allowing a high range of configurations: special tapers, torque, tolerances, linearity, cut track, etc.
PAGE 6
application notes DETENTS WITH CONSTANT VALUE ZONES PIHER´s potentiometers may feature special stepped outputs or constant voltage zones for the 10mm and 15mm product families. Constant value zones can be combined with strategically located stops matching the flat areas of the output. 10 stepped outputs version example: These constant voltage zones can be combined with PIHERs mechanical detents to provide exact alignment between the electrical output (flat areas) and the mechanical detents positions.