User Manual
PSEN cs3.1p/M12
Operating Manual PSEN cs3.1p/M12
1003296-EN-04
8
For your safety
WARNING!
Loss of safety function due to manipulation of the interlocking device
Manipulation of the interlocking device may lead to serious injury and death.
– You should prevent any possibility of the interlocking device being
manipulated through the use of a spare actuator.
– Keep the spare actuator in a safe place and protect it from unauthor-
ised access.
– If spare actuators are used, these must be installed as described in
Installation [ 15].
} Do not remove the protective cap until you are just about to connect the unit.
Unit features
} Transponder technology for presence detection (safety function)
} Pilz coding type: Coded
} Dual-channel operation
} 2 safety inputs for series connection of multiple safety switches
} 2 safety outputs
} 1 signal output
} LED display for:
– State of the actuator
– State of the inputs
– Supply voltage/fault
} 1 direction of actuation
} Connection types:
– PSEN cs3.1p: 8-pin M8 male connector
– PSEN cs3.1 M12/8-0.15m: 8-pin M12 male connector, 0.15 m cable
– PSEN cs3.1 M12/8-1.5m: 8-pin M12 male connector, 1.5 m cable