Datasheet

Technical Data

Rope pull switch

Date of issue: 02.03.2010 / Page 1 of 2

Document: 7100072000_en.doc / Status: 2 / 2148-10

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, D-73760 Ostfildern / www.pilz.com

Vorlage : 0850174282 Orig. 1

Accessory rope pull switch

Rope, galvanised with PVC-jacket

Rope- Ø / jacket- Ø Design min. braking force Art.-No. Art.-Desc.

D 3 / D 4 acc. to DIN 3055 538 kp 570314 PSEN rs rope d3/d4 50m

D 3 / D 4 acc. to DIN 3055 538 kp 570315 PSEN rs rope d3/d4 100m

Material: FE-galvanised, strength 1770N/mm²

PVC-jacket, red

Pulley block, hinged

Art.-No. Art.-Desc.

570313 PSEN rs pulley flex

Material: Zinc-base die-casting alloy (Roller: polyamide)

Plating: blue passivated, RoHs-conform

Deflection pulley Ø 75 for rope diameter up to 8 mm

Roller- Ø Load capacity Rope- Ø max. Art.-No. Art.-Desc..

75 mm 15 kg 8 mm 570312 PSEN rs pulley 75

Material: Steel /Polyamide

blue passivated, RoHs-conform

22+1/-3

17±1

55±0.5

5.3 +1.2/-0.1

85±1

30±1

89±1

PAGE 1
Technical Data Rope pull switch Accessory rope pull switch Rope, galvanised with PVC-jacket Rope- Ø / jacket- Ø D3/D4 D3/D4 Design min. braking force acc. to DIN 3055 538 kp acc. to DIN 3055 538 kp Material: FE-galvanised, strength 1770N/mm² PVC-jacket, red Art.-No. 570314 570315 Art.-Desc. PSEN rs rope d3/d4 50m PSEN rs rope d3/d4 100m Pulley block, hinged 17±1 Art.-No. 570313 Art.-Desc.
PAGE 2
Technical Data Rope pull switch Rope pull spring Fn 218 N 335 N R 2,1 N/mm 1,9 N/mm Material: Wire acc. to DIN 2076 – 1.4310 Rope clamp - Zinc-base die-casting alloy Eye bolt acc. to DIN 444 – 4.6 Thick-film passivated (except spring), RoHs-conform Plating: L0 383 mm 483 mm Ln 487 mm 653 mm Art.-No. 570310 570311 Art.-Desc. PSEN rs spring 175 PSEN rs spring 300 Fn : Spring Force at Ln R : Spring Rate Date of issue: 02.03.2010 / Page 2 of 2 Document: 7100072000_en.