Operating Manual

PIT gb RLLE y ETH
Operating Manual PIT gb RLLE y ETH
1005249-EN-01
| 14
Possible assembly positions for the PIT gb RLLE y ETH:
Installation of device
Please note:
} The PIT gb RLLE y ETH must be installed on a solid surface (e.g. profile, panel).
} The PIT gb RLLE y ETH must be situated so that it can easily be reached above the ac-
cess level (e.g. base level, platform level).
The E-STOP pushbutton must be accessible at a height of between 0.6 m to 1.7 m above
the access level.
} The mounting surface must have a max. unevenness of 0.5mm.
} The housing of the PIT gb RLLE y ETH must make contact with the mounting surface
over at least 5mm on both ends (see figure).
5 mm
[2]
[2]
[3]
5 mm
[1]
Legend
[1] Mounting surface
[2] Mounting bracket
[3] Housing