Operating Manual

PIT gb RLLE y ETH
Operating Manual PIT gb RLLE y ETH
1005249-EN-01
| 18
4. Release pushbutton 2 when the yellow LED lights up and press it again with 10
seconds.
The LED light up yellow and then green.
The PIT gb RLLE y ETH has been reset successfully.
LED statuses on the PITreader for resetting the PIT gb RLLE y ETH to its factory
settings
Description Colour State
Pushbutton S2 pressed Yellow
Pushbutton S2 is released
Pushbutton S2 is pressed again, resetting the device to its de-
fault settings
The device has successfully been reset to its default settings Green
Maintenance and testing
It is not necessary to perform maintenance work on the product in normal operation. Please
return any faulty products to Pilz.
Cleaning
Clean the unit every month with a soft cloth and a mild cleaning agent.
Monthly check
} Perform a manual function test [ 16] of the PIT gb RLLE y ETH every month.
INFORMATION
This inspection may only be carried out by qualified personnel.
Check after modifications
Check the PIT gb RLLE y ETH each time the plant/machine is modified. Exchanging the
PIT gb RLLE y ETH is also to be classed as a modification.
You must comply with the requirements of the applicable national regulations.
INFORMATION
This inspection may only be carried out by qualified personnel.