Operating Manual

PIT gb RLLE y ETH
Operating Manual PIT gb RLLE y ETH
1005249-EN-01
| 20
Electrical data G1000020 G1000021
Min. contact current 1 mA 1 mA
E-STOP G1000020 G1000021
Quantity 1 1
Number of N/C contacts 2 2
Number of signal contacts 1 1
E-STOP release type Turn release Turn release
Utilisation category
In accordance with the standard EN 60947-5-1 EN 60947-5-1
DC13 at 24 V 24 V
Current 0,1 A 0,1 A
Contact material Ag Ag
Mechanical life 50,000 cycles 50,000 cycles
Electrical life 6050 cycles 6050 cycles
Pushbutton G1000020 G1000021
Quantity 2 2
Number of N/O contacts 2 2
Utilisation category
In accordance with the standard EN 60947-5-1 EN 60947-5-1
DC13 at 24 V 24 V
Max. current 0,1 A 0,1 A
Mechanical life 1,000,000 cycles 1,000,000 cycles
B10 1,300,000 cycles 1,300,000 cycles
Contact material Ag Ag
PITreader G1000020 G1000021
Sensor's mode of operation Transponder Transponder
Transponder's energy supply passive (battery free) passive (battery free)
Transponder's frequency band 13,24 - 13,88 MHz 13,24 - 13,88 MHz
Max. transmitter output of
transponder 170 mW 170 mW
Supply interruption before de-ener-
gisation 10 ms 10 ms
Galvanic isolation (semiconductor
output) No No
Switching current per semicon-
ductor output 100 mA 100 mA
Short circuit proof (semiconductor
output) yes yes
Signal level at “1” (input) 15 - 30 V DC 15 - 30 V DC
Input current range 4 mA 4 mA
Galvanic isolation (input) No No
Ethernet interface G1000020 G1000021
Number 1 1
IP address, factory setting 192.168.0.12 192.168.0.12
Connection type M12x1, 4-pin, D-code M12x1, 4-pin, D-code
Transmission rate 10/100 Mbit/s 10/100 Mbit/s