User guide

PSEN cs4.1a/b/p/M12
Operating Manual PSEN cs4.1a/b/p/M12
22187-EN-02
16
Use the seals (3) to close the mounting
holes on the sensing face of the safety
switch.
Orthogonal assembly
Drill holes in the mounting surface (see Di-
mensions [
19]) and cut threads in the
holes for M4 screws.
Use a screw to fix the safety switch in place.
1. Do not fully tighten the 2nd screw on the
safety switch.
2. Attach the screws for the actuator, leav-
ing a distance of 3 … 6 mm between the
screw head and plate.
For the next steps you will need the seals as
illustrated.
Use the seals (2) to close the unused
mounting holes on the actuator.
Slide the actuator on to the screws.