User Manual Part 1
Table Of Contents
- Operating Manual PSEN sg2c
- Preface
- Contents
- 1 Introduction
- 2 Overview
- 3 Safety
- 4 Function description
- 5 Wiring
- 5.1 Notes on cable run
- 5.2 Recommended cable cross sections
- 5.3 General wiring guidelines
- 5.4 Terminal configuration
- 5.5 Wiring the connection terminals
- 5.6 E-STOP pushbutton connection
- 5.7 Enabling switch connection
- 5.8 EMC requirements
- 5.9 Connection to evaluation devices
- 5.10 Single connection
- 5.11 Series connection
- 6 Installation
- 7 Adjustment
- 8 Maintenance
- 9 Operation
- 10 Technical Details Order No. 570800-570804
- 11 Technical Details Order No. 570806-570810
- 12 Technical Details Order No. 570812-570816
- 13 Technical Details Order No. 570818-570822
- 14 Technical Details Order No. 570824-570828
- 15 Technical Details Order No. 570830-570834
- 16 Technical Details Order No. 570880-570884
- 17 Safety characteristic data
- 18 Order reference
- 19 EC Declaration of Conformity
- Contact address
9.1 Statustable
Operating mode
Mode
Gate closed
Bolt tongue engaged
Guard locking element engaged
Inputs X2-3 and X2-4
Safety outputs X1-3 and X1-4
Pushbutton 1 operated
Pushbutton 2 operated
Output X1-5
Signal output X1-9
Solenoid operation X1-6
Solenoid operation X1-6
Input X1-8*
“Device” LED
LED Input
LED Lock
LED Safety Gate
LED button 1
Power on
Lock
Locking
Normal
Unlock