User Manual Part 1
Table Of Contents
- Operating Manual PSEN sg2c
- Preface
- Contents
- 1 Introduction
- 2 Overview
- 3 Safety
- 4 Function description
- 5 Wiring
- 5.1 Notes on cable run
- 5.2 Recommended cable cross sections
- 5.3 General wiring guidelines
- 5.4 Terminal configuration
- 5.5 Wiring the connection terminals
- 5.6 E-STOP pushbutton connection
- 5.7 Enabling switch connection
- 5.8 EMC requirements
- 5.9 Connection to evaluation devices
- 5.10 Single connection
- 5.11 Series connection
- 6 Installation
- 7 Adjustment
- 8 Maintenance
- 9 Operation
- 10 Technical Details Order No. 570800-570804
- 11 Technical Details Order No. 570806-570810
- 12 Technical Details Order No. 570812-570816
- 13 Technical Details Order No. 570818-570822
- 14 Technical Details Order No. 570824-570828
- 15 Technical Details Order No. 570830-570834
- 16 Technical Details Order No. 570880-570884
- 17 Safety characteristic data
- 18 Order reference
- 19 EC Declaration of Conformity
- Contact address
10 TechnicalDetailsOrderNo.570800570804
General 570800 570802 570804
CE,TÜV CE,TÜV CE,TÜV
Transponder Transponder Transponder
Low Low Low
4 4 4
Electricaldata 570800 570802 570804
24V 24V 24V
DC DC DC
15%/+10% 15%/+10% 15%/+10%
2,0W 2,0W 2,0W
5,00A 5,00A 5,00A
1Hz 1Hz 1Hz
24V 24V 24V
1,5A 1,5A 1,5A
40nF 40nF 40nF
70nF 70nF 70nF
5,00A 5,00A 5,00A
0,0002ms 0,0002ms 0,0002ms
3A 3A 3A
1000Ohm 1000Ohm 1000Ohm
Inputs 570800 570802 570804
2 2 2
24VDC 24VDC 24VDC
5,0mA 5,0mA 5,0mA
ESTOP 570800 570802 570804
2 2
Turnrelease Turnrelease