User Manual Part 1
Table Of Contents
- Operating Manual PSEN sg2c
- Preface
- Contents
- 1 Introduction
- 2 Overview
- 3 Safety
- 4 Function description
- 5 Wiring
- 5.1 Notes on cable run
- 5.2 Recommended cable cross sections
- 5.3 General wiring guidelines
- 5.4 Terminal configuration
- 5.5 Wiring the connection terminals
- 5.6 E-STOP pushbutton connection
- 5.7 Enabling switch connection
- 5.8 EMC requirements
- 5.9 Connection to evaluation devices
- 5.10 Single connection
- 5.11 Series connection
- 6 Installation
- 7 Adjustment
- 8 Maintenance
- 9 Operation
- 10 Technical Details Order No. 570800-570804
- 11 Technical Details Order No. 570806-570810
- 12 Technical Details Order No. 570812-570816
- 13 Technical Details Order No. 570818-570822
- 14 Technical Details Order No. 570824-570828
- 15 Technical Details Order No. 570830-570834
- 16 Technical Details Order No. 570880-570884
- 17 Safety characteristic data
- 18 Order reference
- 19 EC Declaration of Conformity
- Contact address
ESTOP 570818 570820 570822
24V 24V 24V
100mA 100mA 100mA
Sectionstop 570818 570820 570822
2
Turnrelease
EN6094751
48V
1,5A
48V
1,5A
6050cycles
24V
100mA
Semiconductoroutputs 570818 570820 570822
2 2 2
2 2 2
500mA 500mA 500mA
12,0W 12,0W 12,0W
0,20mA 0,20mA 0,20mA
Yes Yes Yes
Pushbutton 570818 570820 570822
EN6094751 EN6094751 EN6094751
48V 48V 48V
0,1A 0,1A 0,1A
48V 48V 48V
0,1A 0,1A 0,1A
1,000,000cycles 1,000,000cycles 1,000,000cycles
1,000,000cycles 1,000,000cycles 1,000,000cycles
AgNi AgNi AgNi
Times 570818 570820 570822
450µs 450µs 450µs