Datasheet

Features:
 Python API
 Four analogue inputs - A tidy way to integrate analogue signals
into your project.
 Two H-bridge motor drivers - Drive two 5V motors
bidirectionally with up to 200mA per channel.
 Four buffered 5V tolerant inputs - Hook up your Pi to accept
input from 5V systems (like Arduino Uno/Leonardo or 5V
Trinkets).
 Four powered 5V outputs (up to 500mA!) - The on-board
Darlington array can supply up to 500mA per channel (but you'll
be limited to driving around 1A total from the board). Ideal for
stepper motors, solenoids, and relays.
Kit includes: Assembled Explorer HAT PCB, one 2x20 0.1" female GPIO
header, and one 1x20 0.1" female header. Some light soldering is
required to attach the header on, or you can of course solder the pHAT
right onto the Pi Zero
Raspberry Pi not included!
 65mm x 30mm x 2.2mm / 2.56" x 1.18" x 0.09"
 Weight (assembled): 10.5g