Datasheet

Features:
 I2S audio DAC with 3W mono amplifier (MAX98357A)
 Default output of 0.45W/26.5dB
 8Ω 2W Mylar speaker
 Routed holes to channel sound
 10 bright white bar graph LEDs
 SN3218 LED driver chip
 Compatible with Raspberry Pi 3, 2, B+, A+, and Zero
 Female header and speaker require soldering (includes a piece of
bare wire to solder the speaker)
Kit includes:
 Speaker pHAT
 8Ω 2W Mylar speaker
 2x20 pin female header
 50 mm 24AWG bare wire
 4x M2x8 black nylon bolts
 8x M2 black nylon nuts
Note: Pi Zero not included!
Assembled Dimensions: 65.2mm x 30mm x 11.4mm / 2.6" x 1.2" x
0.45"
Assembled Weight: 15.4g / 0.55oz
Notes
 The DAC sums the two audio channels to mono, rather than just
outputting one channel or the other, meaning that you get both
channels of audio out of the single speaker
 The dimensions of the speaker: H 6mm x L 40mm x 20mm.
 Speaker pHAT won't fit on top of a Pibow Coupé or Pibow
Zero due to the height of the speaker.
 It's important that you use four of the included eight nuts as
spacers to space the speaker slightly away from the PCB. Not
doing this, and having the speaker cone touching the PCB, can
result in sound degradation and even damage to the speaker.