User's Manual

PINEAPPLE TECHNOLOGY, INC. V-3. DXDPRO-10VH APPLICATI0NS AND INSTALLATION
DXDPRO-10VH MODULATOR MANUAL
THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND
CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION
20
V.3 DXDPRO-10VH APPLICATIONS AND INSTALLATION
E. GPS RECEIVER ACTIVATION (Continued)
The GPS receiver can be activated by using the web page by following these steps:
1. Connect an antenna.
2. Open the web page main menu and select the GPS Icon and pull it down to the lower level of
the web page. A new section on GPS appears.
3. Select the antenna voltage for the receiving antenna. Options are 5 vdc, 3.2 vdc, or none.
4. Check the ―ATIVATE ANTENNA‖
5. Go to the reference window and select ―AUTO‖ as reference source.
The modulator is now locked to GPS source and will remain there until changed. If for some reason the
GPS signal is lost, the internal clock is automatically selected and the system continues to operate without
interruption.
GPS Setup
Window