User's Manual

PINEAPPLE TECHNOLOGY, INC. V.5 - ETHERNET WEB PAGE CONTROL AND MONITORING

DXDPRO-10VH MODULATOR MANUAL

THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND

CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION

V.5 ETHERNET WEB PAGE CONTROL AND MONITORING

B. ETHERNET WEB PAGE SETUP

General Introduction

The web service control interface allows monitoring of status as well as configuration of the operational

parameters of the device subject to the log-in status for the user (observer, operator or administrator). The user

interface (web browser display) applies a user-friendly concept where the general navigation between individual

sub-menus is based on a block oriented representation of the controlled device. The specific control for a certain

function is therefore easily accessed by ‗dragging‘ the functional block of interest into the configuration section of

the display.

The web service interface is equally useful for controlling the PT2000 Terrestrial Gateway unit in a configuration

with a direct connection (Ethernet patch cable) between the PT2000 Terrestrial Gateway unit and the PC as well

as in the typical operational environment where multiple products are accessible from the PC across a shared

network.

Document structure and scope

This instruction manual is divided into three main sections:

 Electrical interface and IP address configuration.

 Operation principle for the Web service interface.

 Software update over Ethernet.

The present document describes the operation from a generic viewpoint and it does not, therefore, address in

detail functions or settings applicable to a specific member of the PT2000 Terrestrial Gateway product family.

C. IP ADDRESS CONFIGURATI0N

IP address settings for the PT2000 Terrestrial Gateway unit can be carried out in several different ways:

a) Hardware preset to default status.

b) Configuration over Ethernet (the current address setting must be known and that the PC used for the

configuration must be configured with a compatible address).

1. IP Address Preset

 IP address : 192.168.168.168

 Network Mask: 255.255.0.0