User's Manual

PINEAPPLE TECHNOLOGY, INC. V.5 - ETHERNET WEB PAGE CONTROL AND MONITORING
DXDPRO-10VH MODULATOR MANUAL
THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND
CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION
35
V.5 . ETHERNET WEB PAGE CONTROL AND MONITORING (Continued)
D. WEB SERVICE OPERATION
3. Web Service - Operation Principle
Parameter Control for Main Function Block
Parameter control for Specific Function Block
To access the control panel for a specific function block (for example the ‗Tuner‘ block) proceed as follows:
1. Place the cursor over the block of interest (for example the ‗Tuner‘ block).
2. Press the left mouse button.
3. While keeping the left mouse button pressed drag the block to the lower section of the screen.
4. When the block has been dragged to the lower section release the left mouse button. The control panel
that is associated with the block will now open in place of the panel over which the block was dropped.
The block may freely be dropped in any of the three panels (left, center or right) in accordance with the
preferences.
4.
When the block is
placed in the desired
panel (left, centre or
right), release the left
mouse key.
The new control
panel will now
automatically open