User's Manual

PINEAPPLE TECHNOLOGY, INC V.6 - ADAPTIVE PRE-CORRECTOR WEB SERVICE OPERATION
DXDPRO-10VH MODULATOR MANUAL
THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND
CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION
49
V.6 ADAPTIVE PRE-CORRECTOR WEB SERVICE OPERATION (Continued)
C. OPERATION OF ADAPTIVE PRE-CORRECTOR
3. LINEAR PRE-CORRECTOR CONFIGURATION
Linear Pre-Corrector Monitor Panel
The linear pre-corrector monitor panel provided information about the instantaneous performance and
operation mode.
 Status: The status field shows the operational status for the linear pre-corrector system. The
possible states are:
 Monitoring: indicates that the adaptive linear mode is disabled and that either the
‗Static‘ or ‗Monitoring‘ mode (refer to 3.3.1 above) is selected.
 Initializing <nn%>: Indicates the progress of the initial data collection by adaptive
linear mode.
 Auto applying: Indicates that correction results of the adaptive linear process are
being applied to the RF output characteristic
 Not running: Adaptive linear operation is suspended by the controller system while
adaptive linear mode is selected.
 Amplitude ripple pp: Read-out of the measured amplitude ripple for the signal applied
to the linear sense port. Displays the result of the last completed iteration by adaptive
mode. Displays the instantaneous performance by ‗Static‘ and ‗Monitoring‘ mode.
 Group delay pp: Read-out of the measured group delay ripple for the signal applied to
the linear sense port. Displays the result of the last completed iteration by adaptive
mode. Displays the instantaneous performance by ‗Static‘ and ‗Monitoring‘ mode.
 Iterations: Displays the number of adaptive linear pre-corrector iterations completed
since reset of corrector characteristic or reboot of the unit.