User's Manual

PINEAPPLE TECHNOLOGY, INC VI. DTXPRO-800 INSTALLATION PROCEDURES

DTXPRO-800VH OPERATING AND SERVICE MANUAL

THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND

CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION

VI. DTXPRO-800VH INSTALLATION PROCEDURE (Continued)

4. ANTENNA CONNECTION: The transmitter is equipped with 1 5/8 EIA flanges located at the top

of the rack. The RF ATSC compliant mask filter and output directional coupler(s) are provided

with the transmitter and are to be located and mounted at the customer discretion. Pineapple

Technology, Inc. recommends the filter be securely mounted above the transmitter cabinet but

not in a position that could inhibit air circulation from the top of the cabinet. The directional

coupler is usually mounted on the output of the mask filter convenient for connection to the

station antenna transmission line. Two cables have been provided for connection between the

output directional coupler monitor ports and the DXDPRO-10VH modulator. Conditions vary

from site to site so some engineering may be required to ensure that the antenna is receiving

the correct amount of power to comply with FCC licenses and to ensure safety from lightning,

etc.